-
About
-
Products
-
Case Show
-
News
-
Contact
09
2023
-
05
How can I use the cleanliness inspection equipment to ensure that it works properly?
Source：
Author：
Cleanliness testing equipment is a simple instrument to detect the cleanliness of the surface of parts, set pressure jet cleaning, cleaning agent online filtration recovery and recycling fine filtration in one, so that the cleaning of parts and the filtration and recovery of particulate pollutants at the same time, the particulate pollutants on the surface of the parts can be collected on the surface of the filter membrane in time, and the filter membrane samples can be obtained after cleaning the parts through the cleanliness testing equipment, reducing the residence time of particulate pollutants in the cleaning agent; The cleanliness test equipment subverts the traditional manual cleaning test method, standardizes the control process of cleanliness test, and improves the test efficiency.
When operating the cleanliness testing equipment, pay attention to the method and pay attention to the maintenance after use, and the specific precautions should be as follows:
1. Do not start the device when the inlet pipe of the cleanliness detection equipment is covered or blocked.
2. It should be used in a clean environment to prevent damage to the laser sensor.
3. Do not pump gases containing oily or corrosive substances, and do not measure gases that may react (such as hydrogen and oxygen). These gases can also explode inside the device. Testing these gases requires more information from the manufacturer of the cleanliness test equipment.
4. Water, solution or other liquids cannot enter the cleaning tank from one inlet pipe.
5. When sampling, avoid polluting particles by the sampling equipment itself.
6. Less vibration and impact when handling cleanliness testing equipment.
The above problems are the details that need our attention when managing the equipment of cleanliness detection technology, and only by standardizing the operation can the equipment be effective, so special attention needs to be paid to when using it.
Related Information
2025-09-03
2023-05-09
2023-05-09
Customer Service Center: +86-189 9855 4407
Service hotline: +86-400 8860 801
Office hotline: +86-23-68039219 (fax)
Contact address: Zhongdian Optical Valley Science and Technology Park, Fenghuang Town, Shapingba District, Chongqing
