-
About
-
Products
-
Case Show
-
News
-
Contact
09
2023
-
05
How to clean the extractor without damaging the cleanliness extractor?
Source：
Author：
The cleanliness extractor is specially developed for manufacturers who need to maintain a high standard of cleanliness, it can quickly clean, extract and prepare according to the standards of enterprise and part cleaning particles, the equipment can guide the user through each step of the process conveniently and intuitively, even if the operator is inexperienced, it can quickly and easily collect clean data.
Hydraulic control systems inevitably become heavily contaminated before the new cleanliness extractor is in operation, and although manufacturers of hydraulic components pay great attention to the internal development and cleanliness of the components themselves, new components can still contain contaminants such as burrs, chips, flashing, dust, welding slag, and paint. Parts can also be contaminated due to improper storage and handling.
In the teaching process of tank manufacturing, it may lead to the accumulation of rust, paint flakes and dust, etc., although the fuel tank has been cleaned before use, but many companies are difficult to see the pollutants directly with the naked eye, and these contaminants may be brought into the system during the installation and construction of pipes and firings. Even new oil can contain some unexpected contaminants, so measures must be taken to filter out the contaminants as soon as possible, otherwise the cleanliness extractor may fail soon after it is put into operation, and the early failure is often very serious, and some components such as motors can cause fatal damage.
1. Disassembly and cleaning method: After the external cleaning of the parts, all the parts can be disassembled and carefully cleaned the wet area of the parts with detergent, and then we collect all the data with the solvent and measure their degree of pollution.
2. Vibration flushing method: used to inject parts - quantitative cleaning of test solution, sealing components, mechanical shaking components, flushing all the pollutants in the components into the test solution, and then measuring the degree of contamination of the test solution.
3. Test bench flushing method: allow connecting components - in the pre-purification test bench control system, the test liquid passes through the economic circulation of electronic components, and all the pollutant data in the component enterprise are washed into the test liquid, and then the sample liquid is collected from the system to determine the degree of environmental pollution.
Related Information
2025-09-03
2023-05-09
2023-05-09
Customer Service Center: +86-189 9855 4407
Service hotline: +86-400 8860 801
Office hotline: +86-23-68039219 (fax)
Contact address: Zhongdian Optical Valley Science and Technology Park, Fenghuang Town, Shapingba District, Chongqing
